DDR-3 is the next-generation evolution of DDR and newer DDR-2 memory technology that will break the Gigahertz speed barrier for memory speed.

DDR-3 memory comes with a promise of a power consumption reduction of 30% compared to current DDR-2 modules, due to DDR-3’s 1.5 V supply voltage, compared to DDR-2’s 1.8 V or DDR-1’s 2.5 V. This supply voltage works well with the latest fabrication technology used for most DDR-3 chips. Some manufacturers further propose to use “dual-gate” transistors to reduce leakage of current.

DDR-3 is an industry standard technology defined by JEDEC, who is the semiconductor standardization body of the Electronic Industries Alliance. About 300 member companies representing every segment of the computer memory industry actively participate to develop standards to meet the industry needs.

kinston ddr3

DDR-3 memory features higher data bandwidths, faster speeds, lower voltage and power consumption, and improved thermal performance. Lower power consumption will allow longer battery life for laptops. DDR-3 memory is engineered to support the next-generation quad-processors that require higher data bandwidth to enable higher levels of performance.

The main benefit of DDR-3 comes from the higher bandwidth made possible by DDR-3’s 8 bit deep pre-fetch buffer, whereas DDR-2’s is 4 bits, and DDR-1’s is 2 bits deep. Theoretically, these modules could transfer data at an effective clock rate of 800–1600 MHz (using both edges of a 400–800 MHz I/O clock), compared to DDR-2’s current range of effective 400–800 MHz (200–400 MHz clock) or DDR-1’s range of 200–400 MHz (100–200 MHz). To date, such bandwidth requirements have been mainly found in the graphics market, where fast transfer of information between frames is required.

Prototypes were announced in early 2005, and products started appearing on the market as of mid-2007, in the form of motherboards based on Intel’s P35 “Bearlake” chipset and memory DIMMs at speeds up to DDR-3 1600Mhz. DDR-3 launched for these special Intel chipset-based desktops in July 2007, and notebook and server platforms will follow in 2008 and 2009. AMD’s roadmap shows they will also support DDR-3 as the new memory technology continues its market ramp-up in 2008.

DDR-3 memory modules come in 1066MHz, 1333MHz and 1600MHz speeds (data rate), with 1066MHz and 1333MHz DDR-3 launched in 2007, with 1600MHz DDR3 expected in 2008. This compares with DDR-2 speeds of 533MHz, 667MHz, and 800MHz.

DDR-3 DIMMs have 240 pins, the same number as DDR-2, and are the same size, but are electrically incompatible and have a different key notch location. This will keep end users from installing an incorrect part into a DDR-2 or DDR-3 motherboard.

GDDR3 memory, with a similar name but completely different technology, has already been in use for several years in high-end graphic cards such as ones from NVIDIA or ATI Technologies, and as main system memory on the Microsoft Xbox 360. It has sometimes been incorrectly referred to as “DDR-3”.

DDR-3 will be available on desktops, servers, notebooks, telecommunications/networking and other platforms in the following form-factors:
• Unbuffered DIMMs, ECC or non-ECC
• Registered ECC DIMMs
• MicroDIMMs
• SO-DIMMs
• Custom Modules

Leave a Reply

Your email address will not be published. Required fields are marked *

Ads Blocker Image Powered by Code Help Pro

Ads Blocker Detected!!!

We have detected that you are using extensions to block ads. Please support us by disabling these ads blocker.
Powered By
Best Wordpress Adblock Detecting Plugin | CHP Adblock